Invited Lecture
Invited Lecture
Thursday, November 6 ： A session, B session
Friday, November 7 ： C session, D session
| [A session] Thursday, November 6 |
| A-1 | Relationship between Adhesion and Structures of Interfacial regions （Nitto Denko Corporation）Tsukasa Miyazaki |
| A-2 | Surface/Interface Design by Polymer Brushes and Their Application （Institute for Chemical Research, Kyoto University）Yoshinobu Tsujii |
| A-3 | Synthesis of Optically Active Conjugated Polymers and Control of the Higher Order Structures （Kansai University）Fumio Sanda |
| A-4 | environmentally-friendly surface modifications using ubiquitous elements （AIST）Atsushi Hozumi |
| A-5 | New Concept of Hybrid Materials: Polymeric Materials Based on Element-Blocks （Kyoto University）Yoshiki Chujo |
| A-6 | Structure Analyses / Control and Functionality of Polymer Interface （Kobe University）Takashi Nishino |
| A-7 | Protective film of high adhesion type for optical film （Sekisui Chemical Co., Ltd）Katsunori Toyoshima
|
| A-8 | Binding Technique for Different Kinds of Engineering Plastics （Polyplastics Co., Ltd）Mitsunori Matsushima
|
| [B session] Thursday, November 6 | |
| B-1 | Highly efficient Dye-sensitized solar cell （NIMS）liyuan han
|
| B-2 | Non-vacuum process of ZnO thin film for solar cell
（University of Miyazaki）Kenji Yoshino |
| B-3 | white see-through solar cells
（Gifu University）Kazumasa Funabiki |
| B-4 | Ultraflexible Organic Integrated System for Bio-medical Applications
（The Institute of Scientific and Industrial Research, Osaka University）Tsuyoshi Sekitani |
| B-5 | High-Performance Secondary Batteries without Minor or Toxic Elements: Sodium-Ion Batteries
（Tokyo University of Science）Shinichi Komaba |
| B-6 | Development of Middle/High Temperature Polymer Electrolyte Fuel Cell with Very High Durability
（Kyushu University）Naotoshi Nakashima |
| B-7 | Challenge of Packaging Technology in the era of Cognitive Computing （IBM Japan Ltd）Yasumitsu Orii |
| B-8 | Molecular design at phase segregation interface in highly ordered nanostructure for development of novel photofunctional materials
（Kyoto Institute of Technology）Sadayuki Asaoka |
| [C session] Friday, November 7 |
| C-1 | Present status and future prospects of automotive weight reduction by plastics
（Ohba Juku）Toshiyuki Oba |
| C-2 | The Application and Development of Polymer Materials in Railways
（Railway Technical Research Institute）Masanori Hansaka |
| C-3 | Polymer Materials contributing to Civil Engineering Works
（Kajima Corporation）Yukiyoshi Kitamoto |
| C-4 | KURARAY's Plastic Scintillating Optical Fiber that contributed to the Experimental Discovery of the Higgs Boson
（Kuraray Co., Ltd）Osamu Shinji |
| C-5 | New development of TEMPO-oxidized cellulose nanofibers
（The University of Tokyo）Akira Isogai |
| C-6 | Supramolecular Network: Sliding motion of rings changes physical properties
（The University of Tokyo）Kohzo Ito |
| C-7 | Development of Advanced Pressure Sensitive Adhesive by Using Living Radical Polymerization
（Otsuka Chemical Co., Ltd）Takashi Kameshima |
| C-8 | Stimulus Response Behavior of Liquid Crystal Elastomers
（Kyoto Institute of Technology）Kenji Urayama |
| [D session] Friday, November 7 |
| D-1 | Nano-carbon Electroactive Polymer (EAP) Actuators
（AIST）Kinji Asaka |
| D-2 | Micro-Space Cell Culture plate for three dimensional cell culture
（Kuraray Co., Ltd）Masaya Hosoda |
| D-3 | Polymer Materials for Medical Devices
（Terumo Co.,Ltd）Tetsuro Kawanishi |
| D-4 | Preparation of Chitin Nanofibers and Their Biological Functions
（Tottori University）Shinsuke Ifuku |
| D-5 | Amorphous PLA for outside applivations like traffic paint
（Toyobo Co., Ltd）Takashi Miyamoto |
| D-6 | Development of Polyurethane Gel for Various Applications
（Takiron Co., Ltd）Masahiko Taniguchi
|
| D-7 | Production of Therapeutic Antibodies
（Kyowa Hakko Kirin Co., Ltd）Masayoshi Tsukahara
|
| D-8 | Design of Biocompatible Polymers by Intermediate Water Concept and Applications for Medical Devices
（Yamagata University）Masaru Tanaka
|
